Ducati.ms - The Ultimate Ducati Forum banner

Early Supersport half fairing mounting hardware

3.9K views 14 replies 8 participants last post by  Chiefgearhead  
Allen head bolt (Red arrow) passes through a countersunk fairing washer (Green arrow) and there's also a thick plastic washer (Blue arrow) that spaces the fairing panel away from the wellnut on the back side of the panel.

Parts pic.
Image



Here's a pic of the outer fairing washers. Part number is 84110011B. I have no pic of the inner plastic fairing washers. Info I have says they're no longer available. Could probably get some at the hardware store though.
Image
 
I own a '95 900SS CR and the picture that I posted above is exactly how the short fairings on the CR model bolt up to the frame.

When you say "bikini fairing" are you referring to the Ducati Kaemna aftermarket bikini fairing like in the pic below?
Image