Ducati.ms - The Ultimate Ducati Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1 (Edited)
Hi, casting a wide net here and seeing what comes up. Looking for some stuff for my mild resto job planned this winter:

900SS-
-Clear windshield
-Red CR fairing bits (interested in all except front headlight section)
-Front CF fender, RSR small CF hugger
-Adjustable brake/clutch levers (big pivot, already have MCs)
-oil cooler relocation kit (brackets, cooler, lines, anything)
-stock handlebars (as long as not bent)
-Air box filter retainer

-also interested in any trick/CF/unique stuff you might have laying around

Early Monster-
-oil cooler setup including cooler, lines, valve cover
 

·
Registered
Joined
·
5,806 Posts
If you go with a clear windshield it inhibits your ability to read the gauges. I’ve had both.
 

·
Premium Member
Joined
·
943 Posts
Is an oil cooler from a 2008 Hyper acceptable?
 

·
Premium Member
Joined
·
534 Posts
-Red CR fairing bits (interested in all except front headlight section)

-Front CF fender

-stock handlebars (as long as not bent)
I have each of these. You can send me a PM if you want.
 

·
Premium Member
Joined
·
943 Posts
So thats no on the hyper cooler...........
 

·
Registered
Joined
·
150 Posts
Hi, casting a wide net here and seeing what comes up. Looking for some stuff for my mild resto job planned this winter:

900SS-
-Clear windshield
-Red CR fairing bits (interested in all except front headlight section)
-Front CF fender, RSR small CF hugger
-Adjustable brake/clutch levers (big pivot, already have MCs)
-oil cooler relocation kit (brackets, cooler, lines, anything)
-stock handlebars (as long as not bent)
-Air box filter retainer

-also interested in any trick/CF/unique stuff you might have laying around

Early Monster-
-oil cooler setup including cooler, lines, valve cover
I have a used tinted screen and set of handle bars if you are still looking.
 
1 - 10 of 10 Posts
Top