Joined
·
231 Posts
What I've found on my bike is that it does not necesarrily start more difficult, but initially it would run a bit uneven and I have to keep my hand on the throttle to keep it going until it smoothens out. During this time its difficult to keep the revs below 2000rpm, which I generally prefer to make sure the oil circulate throughout the engine before I pick up the revs. Once its smoothened out out and the engine heats up it would idle at say about 1100rpm, no problem. Note, my FCRs are mounted on the stock long manifolds.Lars said:Will the FCR make starting and life in general worse ?
Where I live its generally cool outside and I have been told they make starting and idle trouble in theese conditions.