Ducati.ms - The Ultimate Ducati Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
57 Posts
Discussion Starter #1
I'm using a front wheel from a 748/996/998 on an 07 800ss with 65mm axial calipers.

Will the rotors from a Paul Smart/Sport Classic fit on the 748 wheel?

IIRC there is a 10mm offset, which should be OK, but not certain.

Both are 320mm 6 bolt.
 

·
Banned
Joined
·
2,916 Posts
they will fit, there are not too many different discs
around, just the 5 and 6 bolt pattern, and 10 and
15mm off-set.
all 6 bolt pattern discs have 10mm off-set but the
ones for the 748 R and 998 R.

again, they should fit right on.

cheers.
 

·
Registered
Joined
·
57 Posts
Discussion Starter #3
they will fit, there are not too many different discs
around, just the 5 and 6 bolt pattern, and 10 and
15mm off-set.
all 6 bolt pattern discs have 10mm off-set but the
ones for the 748 R and 998 R.

again, they should fit right on.

cheers.
Thanks!

That's exactly what I needed to know. :cool:
 
1 - 3 of 3 Posts
Top