Ducati.ms - The Ultimate Ducati Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Is it me or CW's instructions for install aren't very clear? Not only that but the images don't display the proper wiring adequately. I'm completely lost as to where to connect the wires as well as the conduit wiring. I know there are a lot of pro's out there with the knowledge on tap. Any help or how to websites to help me get rolling.:confused::confused::confused::mad::mad:

(oh yeah did I mention this is my first bike, so I'm a huge noob.)
 

·
Premium Member
Joined
·
2,369 Posts
I did my own kit and remember there being a grey wire and a black one that are on the plug right near the rear cylinder head. It is the plug that runs wires to the taillight. You can get your constant power and ground from that. It is on the end of the plug that is closest to the back of the bike. Don't do it from the front, the colors are not the same. Ducati likes to change the color of the wiring as it goes into the plug and comes out for some retarded reason.
 
1 - 2 of 2 Posts
Top