Ducati.ms - The Ultimate Ducati Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
2013 Multistrada 1200s GT. Front brake is weak the first pull or two. Gets firm after that, until it's needed again.
Bled the line. Didn't help.
Any rebuild kits out there, or should I replace front master cylinder?
Thanks
 

·
Registered
Joined
·
446 Posts
2013 Multistrada 1200s GT. Front brake is weak the first pull or two. Gets firm after that, until it's needed again.
Bled the line. Didn't help.
Any rebuild kits out there, or should I replace front master cylinder?
Thanks
No rebuild kits out there, unfortunately. Brembo no longer makes them available. Mighty-vac on the master usually does it for mine and/or tying the lever back overnight. Though it seems to be a recurring problem. OE master is not cheap!
 

·
Registered
Joined
·
75 Posts
If there aren't any leaks (no visible fluid around master cylinder, calipers, lines) I would try the bleeding once more. Make sure you go the correct way round when bleeding (Furthest caliper first etc.)
 
1 - 3 of 3 Posts
Top