Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
917 Posts
The addition/subtraction confusion comes from the gap...typically your always reducing the closer clearance and looking to increase opening clearance

Increasing opener gap requires a numerically smaller shim

Decreasing closer clearance requires a numerically larger shim

I've found .07mm closer & .18mm opener to be just about optimum...monster 821...after numerous adjustments, this setting gave the cleanest looking valve
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top