Ducati.ms - The Ultimate Ducati Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
150 Posts
Discussion Starter #2
Well I think I found them , looks like 230nm, is that correct? Asking since it was located on a non Ducati site. Just want to be sure.
 

·
Registered
Joined
·
402 Posts
Yes, 230 Nm +/- 10% according to the manual. I would error to the low side as the nut is sometimes tough to get off, even with the proper tools.
 

·
Registered
Joined
·
402 Posts
Yes, that and the proper impact socket - steel, not aluminum. Sometimes even with my DeWalt impact gun, it still takes a while to loosen up, hence the keep it toward the low end of the range comment.
 

·
Registered
Joined
·
869 Posts
1 - 9 of 9 Posts
Top