Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
223 Posts
I am with t_bare on this one. I recently bought a used race ECU for my 2012 PP and it was a simple plug & play with the ECU. There is another thread where a guy installed a Termi kit with a ECU on his 2013 and had the same issue. The biggest difference is that the 2013 is a dual spark motor and the fuel map on the earlier Multistradas will not work. With that said the headers, mid pipe and can will fit between 2012 & 2013 models.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top