Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!

tail-light removal

464 Views 3 Replies 4 Participants Last post by  Turbomart
What a pain! Side covers off, then saddlebag supports to remove the inner fender to get at the bolts for the tail-light. one on each side. And now I find there is a bolt in the middle, holding the tail-light assembly from coming off. I can see the threaded end of the bolt but where I'd expect the head of the bolt to be, below the lightbulb in the reflector, there is a flat depression but no bolt head. I'm stumped.
1 - 1 of 1 Posts

· Registered
Joined
·
1,353 Posts
I think it is a push stud, tough to get out push slowly and carefully. This is from memory and it has been a while so please check. Bit of WD and easessssy does it
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top