Ducati.ms - The Ultimate Ducati Forum banner
1 - 1 of 10 Posts

· Registered
30 Posts
Try this..

I had the same problem!! I was able to break it loose by removing the other bolts holding the pieces and turning the pegs/brackets themselves. I cut a little notch in the bolt with a hacksaw just enough to get an old flat blade screwdriver into it to hold it a bit -- not enough to get enough grab to break the bolt free but, once loosened, just enough to back it out.

Mine came already a little stripped and torqued WAY tight.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.