[Darrell]

Hi all , My 2005 St4s is leaking from the clutch master cylinder and I am trying to track down a rebuild kit for it . Ducati want to sell me a complete assembly. I want to avoid that expense as I need money for smashed avocado to keep up with the millennials. It is a Brembo but Brembo Australia cannot supply without a part number.
Any of you guys know of a aftermarket rebuild kit? I feel the ST3 would use the same one as well.
Cheers
Darrell

 

[Punch]

Even though you had posted in the SS forum, your post may have relevance if the clutch levers are the same.

I have read that the 2001 900SS at least uses the Brembo PSC 13 master and that rebuild kits are not available.

The number in the casting of mine is 10.6939.
There is also a number stamped in the top of the casting that is hard to read, but looks like it ends with 12.

When doing some searching I came across this single post that may be of interest.

https://www.ducati.ms/forums/4930033-post1.html

The casting number in that post is the same, but I really do not know if it is a generic casting and the bore is then milled/machined out to a particular diameter.
The kit referred to is still available and is now 22 Pounds Sterling.

I for one would be interested in more information.

 

[Stick]

If you can verify the bore diameter, I've heard that you can get Brembo rebuild kits thru Husqvarna.
(or maybe KTM?)
My guess is that they offer them due to their "off-road" machines, and they don't worry so much about liabilities for "those" types of machines.

 

[Turbomart]

Have you tried taking it to a brake specialist and getting them to match the seals? I imagine you need a cup and a couple of o-rings.

 

[Punch]

8 days later so it looks like it was not really that important/urgent.

I learnt something - see my sig.

 

[Punch]

8 days later so it looks like it was not really that important/urgent.

I learnt something - see my sig.

Over one month later and still no response.

It is not like my dog ate my school homework excuse or in this case my computer!