Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2021 HERE!
1 - 1 of 1 Posts

·
Registered
Joined
·
791 Posts
One more thing too, don't bind your forks by overtightening the axle nut. I would usually tighten it up nice and snug, spin the wheel for smoothness, untighten nut, slide out the axle slightly with rubber mallet and reseat it back in, and then retighten to specs. This insures that it doesn't create too much pressure between the bearings/speedo when you're forcing the axle through the forks and bearings.
 
1 - 1 of 1 Posts
Top