Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!

1 - 1 of 1 Posts

·
Registered
Joined
·
239 Posts
Discussion Starter · #1 ·
Hi,
I'm getting ready to machine the heads on my '98 900SS for dual plugs. I've seen a few heads done, some better than others. Wondering if anyone who has done the work has pics/dimensions/info? Not a ton of room. I figure that if I have to, I'll build up a little TIG weld to be able to use a 3/4" reach plug, as the choices for 1/2" reach plugs isn't as good. I bought a spare set of heads to practice on, in case I do something horrible.
Not looking for permission, just info.
thanks,
-Armen
 
1 - 1 of 1 Posts
Top