Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2021 HERE!
1 - 4 of 4 Posts

·
Registered
Joined
·
1,109 Posts
Just found these:
http://cgi.ebay.com/ebaymotors/Ducati-SS-99-Sport-Classic-Rearsets-Billet-rear-pegs_W0QQcmdZViewItemQQcategoryZ35611QQihZ009QQitemZ190287355017QQrdZ1QQsspagenameZWDVW

All we need are some hangers, which should be very easy to make with a small welder and some steel :)

I may give these a try
Just a follow-up on this old thread. The rearsets above are in fact what I am running on my sport classic right now. They fit fine, come with shifter and brake pedal, but the pegs are only 3 inches long and feel tiny compared to the GT pegs I am used to. Also, although they stick fine, I don't really like the CNC style pegs and am going to change to some aculigns or satos or something else with big knurled pegs.

If anyone wants these badboys, you can have them for $150 bucks (about 100 bucks less than what I paid for them on fleabay).
 

·
Registered
Joined
·
1,109 Posts
Barfer: Which bike do you have? Mono - single shock? or Biposto?
I assume you need spacers for the right side rearset to fit the dual shock Biposto...
I might be interested, but will have to wait before I get them.


Greg is working on rearsets with removable passenger pegs...
Here's the link to the thread:
http://www.ducati.ms/forums/showthread.php?t=71408
Running them on a GT1000. No spacers needed. There is a pretty decent photo of them on the last page of the current "Sport Classic Photo" thread.
 

·
Registered
Joined
·
1,109 Posts
Rear sliders are off ebay, I can't remember the brand, but like you, I had trouble finding a stand that fit them. I had to chop up some mounts on a pitpull stand to make one that fit.

The pants are only four rides old and for some reason I've been riding spots that only have knee grinding lefts and not rights. Right now my pants look pretty lopsided. Then again, so does my rear tire.

I'm going to Thunderhill in a week, so turn 14 will cure the right knee puck of its virginity.
 

·
Registered
Joined
·
1,109 Posts
Is that a GT, Barfer? If so, I had a set of spools like that on mine and they would hit the mufflers when riding. You might want to be sure they aren't getting in the way.

And you still haven't told us how you mounted the muffler cans now that you removed the ugly black triangles. Surely it is not just held on by the clamp, is it? Or if it is, it won't be for long!
Yes, its a GT and I noticed the same problem. I twisted the mufflers upward at the mounts to increase group clearance and to keep the spools from hitting.

The pipes have been hanging there free as a bird with no supports for exactly 8 days now. This isn't permanent, I plan to get mount for each pipe in short order.
 
1 - 4 of 4 Posts
Top