Ducati.ms - The Ultimate Ducati Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Super Moderator
Joined
·
1,153 Posts
Discussion Starter #1
Up for sale is a brand new set of Probrake braided front brake and clutch lines with aluminium fittings, plus a new aluminium single banjo bolt with crush washers and a new dual banjo bolt with brake light pressure switch. I got these with a set of master cylinders and don't need these for my bike.

20200303_213419.jpg


The brake lines were custom made for Ducati 916 with P4/34 axial calipers and with a bit of added length. Two lines from the master, one for each caliper. I can provide lengths and pics of banjo angles if needed - obviously these can be fitted on other models as well.

The clutch line is for stock configuration.

The lines have swivel fittings for easy assembly, lightweight aluminium fittings, PTFE inner cores and are approved for street use. More details of Probrake lines here: https://www.probrake.de/braided-brake-hoses-ducati-916

RRP over 150€ for all parts, selling for 99€ plus shipping.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top