Absolutely love the work done on the exhaust! Great bike, hopefully I'll get to see it in person this summer! 😎Ducati 1196RS - 996 with 1198RS F11 engine and 1199 Panigale electronics
Some other upgrades too.
Ducati 1196RS - Putting an 1198RS engine into a 996 and...Base bike - Ducati 996 Biposto - 2000 Background for doing the build. I wanted to make a modern version of the Tamburini bikes with the modern technology availible now. Also wanted to reach the 1:1 power to weight ratio (hp:kg) I call it a 1196RS...www.ducati.ms
View attachment 1024335
View attachment 1024334
View attachment 1024333
So cool to see a few of the 2002 Titanium Grey 748s on this forum!!! Hopefully soon mine will be back on the road as well.Here is one of mine: a 2002 748S in Titanium Gray, seen here at Deal's Gap last fall. She also has a couple of nice upgrades: a bump to 853 that I did with Bruce Meyers, and Ohlins FGRT + Monoblock brakes.
View attachment 1024484
Beautifull bike!! Mag swingarm?Many moons lateuuur
View attachment 1024284
You are welcome to it. I took it out the other day and it runs great, but the belts are pushing 7 years and probably 300 miles.Best. Thread. Ever.
BTW, I can help with the "loneley, dirty, and unridden" part.
I'll be right over...You are welcome to it. I took it out the other day and it runs great, but the belts are pushing 7 years and probably 300 miles.
That's a sweet bike kwikryder, very nicely done!Paint by @tito_ronnie_
@corsa_garage carbon fairings, tail support, breather box, gauge cluster, swingarm adapter link, vented clutch case, titanium DZUS fasteners
MS Production carbon tank
@moto_BST diamond TEK wheels, swingarm
Custom @Termignoni_official 1098 70mm exhaust
@Braketech_usa AXIS iron rotors
@Öhlinsracing 1098 TTX MKII shock, FG511 forks
@ducaticorse 998RS radiator/oil cooler
Engine mapped by @pastaperformancemotor
@Nichols_Sportbikes flywheel, 3M/1C 999S cam tuning
@EVRclutch slipper clutch, slave cylinder, airbox, coolant tank
@stackltd ST700SR-M tachometer, water temp gauge
@Ducabike_official Performance Technology clip-ons
#BikeSportDevelopments custom switches
@motowheels Corse Dynamics 30mm offset triples
@ducatiperformance carbon rearsets
@Brembo M4 front calipers, P4 rear caliper, RCS clutch/brake master cylinders
@PodiumRacingTitanium axle, nuts, bolts View attachment 1024874 View attachment 1024875 View attachment 1024876 View attachment 1024877 View attachment 1024880 View attachment 1024881 View attachment 1024882
Haven’t gotten her on a scale yet. Also recently swapped the frame sliders for Ti engine bolts. Engine is s 998 Teatrasetta with Euro 999s cams. No grip at all on the footpegs, only a rough textured coating on top.That's a sweet bike kwikryder, very nicely done!
We've both been following a fairly intensive weight savings regime for our bikes..
Have you had her on a set of scales?
I hope to get mine weighed next week sometime. We might be close ish weight wise. You've got a significant weight savings over me at the back end with that super sweet BST swing arm, but I've got rid of the headlight assembly up front.. What engine do you have in there, a 1098? I've got the heavy old Desmo lump.
And those foot pegs!! Trick af! But do they offer enough grip?!