Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

50 Posts
Discussion Starter · #1 ·
I have the opposite problem from most 996 owners. My MY 2000 bike is lowered about 20 mm in ride height in the rear and the forks are raised about 15 mm. This leaves the bike nearly vertical on the side stand.
Is there a shorter side stand or a side stand bracket with more of an angle that will bolt up on a 996 to give me a bit more lean angle?

Any help would be greatly appreciated.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.