Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
5,016 Posts
IMO, that CNC has the part number listed means they can ship it out quick. In my area there are a couple of places to buy odd bolts, including one of the larger Ace Hardware stores. If you don't know of any you might call up any machine shop and ask them where they would buy a shouldered bolt if they had the specs for it. They might even have of box full of what you need since they use them all the time if they work on aluminum - otherwise what they would have would be steel.
 

·
Registered
Joined
·
5,016 Posts
Wow, $43 for a single bolt,...
When you get the bolt, would you do this forum a favor? Take that bolt to get it matched locally at any of the places I recommended up thread and post the exact measurements. So far you have M12 x 18 length but the shoulder area has a spec also.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top