Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
I use an electrical impact gun, very good tool to remove nuts/bolts which are very tight.
Though, if you do not have an impact gun a buddy of mine said he would use a piece of wood wedged in between the chain and the rear sprocket to prevent it from turning.
Or, a friend sitting on the bike holding the brakes while you loosen the nut should work too.

Good luck
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top