Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
96 Posts
Yes that stand will fit since the S2R/S2R 1K/S4R/S4RS all have the small diameter rear hub, but confirm with the seller that the stand is indeed the small diameter Ducati hub and not the large diameter hub for Superbikes.

The stand comes with two pins because the diameter of the sprocket side is smaller than the wheel side so make sure you get both pins from the seller.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top