Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2021 HERE!
1 - 2 of 2 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 · (Edited)
So I'm in diagnostic mode for the umpteenth time this year. This time it would seem the throttle position sensor has shit the bed. I've got ducatidiag hooked up to reset the TPS, but after resetting, the throttle only goes to 35 degrees or so. I verified this by checking the voltage on the signal wire to the sensor and it only goes from about .25V to 1.6V at full open. It's getting a full 5V power and I'm not seeing anywhere where I could have a bad ground. I had PCV hooked up, but I've taken that off to eliminate that as a possibility.

1. Am I missing something or is my sensor f*cked?

2. Can I replace just the sensor? I'm hearing mixed stories, but most of what I've found points to no. Apparently the TPS and throttle bodies are a unit and sold as such.

I swear to god, the next bike I get will be carburated or Japanese. :mad:

Edit* Oh yeah, duh, it's a 2008 848.
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #3 ·
What kills me is that it seems nearly impossible to get the Magneti Marelli IPF2CB TPS sensor as a stand-alone part. There was a few for sale on the UK eBay at one point, but not right now. I have to wonder how it got fried to begin with??
 
1 - 2 of 2 Posts
Top