[Derek]

I am fitting the Termi full system that came with my bike. So far I have fitted the race ECU and removed the stock exhaust. Before fitting the Termi I'd like to remove the now redundant exhaust valve cable but the stepper motor is buried in the bowels of the bike. How on earth do I get at it to remove the cable?
There must be a easy way as these cable must seize up often but I haven't found it yet. Any clues anybody?

 

[Derek]

Look at starting post #4

http://www.ducati.ms/forums/216-201...d/123267-diy-mid-pipe-install-w-pictures.html

Thanks. And thanks also QL Carl who emailed me more pics.
The only answer was to remove the voltage regulator and pivot the rear subframe up to make room to slip the stepper motor out. Much easier than it sounds but still a fair few bits to undo.
Jings! That Termi exhaust is LOUD. I think the baffle will be staying in.

 

[Derek]

so you feel the full termi is loud with the baffle? or just "louder" than stock with the baffle?

Without the baffle it's a LOT louder than the stock
With the baffle in it's still a lot louder than the stock but probably just quiet enough to get through the annual compulsory roadworthiness MoT test we have here.