Ducati.ms - The Ultimate Ducati Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2,329 Posts
Discussion Starter #1
Has anyone on here removed their rear pads? I can't figure mine out and the W/M is useless. I've taken out the spring clip and I can rotate the pin easily, but it will not come out. The inboard end looks to be mushroom headed and the outboard end is blanked off, so logically it should slide out towards the wheel - but it doesn't.
 

·
Registered
Joined
·
132 Posts
It is extremely snug. It took me the precision tool (the hammer) and a iron punch. I swaped last February for the sinister EBCs and they're great.
 

·
Registered
Joined
·
2,329 Posts
Discussion Starter #3
So does the pin drive out from the wheel side towards the silencer?
 
1 - 5 of 5 Posts
Top