Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 8 of 8 Posts

·
Registered
Joined
·
220 Posts
Discussion Starter · #1 ·
I was wondering if any body knows if a rearset made for the 1098 can be made to fit the 749 / 999 models ??? The hole configuration don't look that off... and if its spacing that might be the problem... spacers might do the trick... Anyone out there who owns both bike types got the time to check possible compatibility... Roland / Ikaika808
 

·
Banned
Joined
·
11,256 Posts
The xx9 bikes have special rear sets because of their positioning, the pegs are actually a bit farther back. The older superbikes are more similar to the 848/1098/1198 series. The 916/748/996/998 slingshot racing rear sets I have just need a tiny bit of milling to make work on the 848 I've got. You don't need any spacers between the 1098 and 916 style rear sets, but the 999 series, they need spacers due to the exhaust.



 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top