Just curious. I saw an article a while back about someone that put an RCS Ti spring on their ST. Does anybody know what the part number that might be for 9.8kg/mm?
I think I found most of what I needed. Any idea where to find specs on our shock spring? ID, free length, etc. I looked in the SM and all that came up was the stock preload length of 8.6in <<--- wrong. 6.5in / 165mm
Yessir. Thank you! I tried some of the other suspension sites, but couldn't get to part number. I remember seeing that racetech site, but forgot the name.
For the future:
Rear Shock: 58.2x178 9.8kg
That is:
2.3in ID
7.0in free length
9.8kg/mm (stock)
Front Forks: 36.7x34.5x315 0.85kg
That is:
1.44in ID
1.36in ID at the taper
12.4in free length (10.6in service limit per the SM)
0.85kg/mm (stock)
I was wrong the previous post about the preload length. Per the SM: 165mm or 6.5in.
Thanks again.
Have a good one.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Ducati.ms - The Ultimate Ducati Forum
A forum community dedicated to all Ducati owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, superbike racing, maintenance, and more!