Ducati.ms - The Ultimate Ducati Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
495 Posts
Discussion Starter #1
Just a couple quick questions. This is my first attempt at replacing the clutch pack on my standard dry clutch. So far I have removed the pack and am awaiting delivery of the replacement from Motowheels. My quesitons are: 1) There are notches in the plain plates that I removed, do they mean anything, and can I place the new ones in any fashion or do the notches mean something?
2) The original friction plates were stamped with their thickness but it looked like each one said 2 mm, will the new ones be the same?
3) Do I need to replace the bearing on the pressure plate?

Let me know what you guys think, thanks.
 

·
Registered
Joined
·
2,441 Posts
notches mean nothing,the thickness of the plates varies,but ''stack height'' is all that matters.and replacing the bearing is good insurance as it can be hard to diagnose a spinning clutch pushrod
 
1 - 2 of 2 Posts
Top