Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2021 HERE!
1 - 4 of 4 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter · #1 ·
If you install a Power Commander V on a 2008 1100 with a stock ECU can you use the Autotune?

If you replace the stock O2 sensor with the wideband sensor from the Autotune kit will it work?

Or do you need a reflash or DP ecu to disable the O2 sensors before you can use the Autotune?
 

·
Registered
Joined
·
56 Posts
Discussion Starter · #3 ·
I have seen posts from multiple people successfully using the PCV on 2008 models.

I thought maybe someone has used the Autotune on a stock ECU, or knows if it is compatible with the stock O2.

Dynojet doesn't even update their website, thought I would solicit opinions.
 

·
Registered
Joined
·
56 Posts
Discussion Starter · #4 ·
Per Dynojet:

You will have to add an additional bung for the wideband O2 and the Autotune will only adjust the open loop region of operation.
 

·
Registered
Joined
·
56 Posts
Discussion Starter · #5 ·
Per Dynojet:

If you have DP ECU or Reflash that eliminates O2 sensor the Autotune will work in all RPM and throttle position ranges.

This has probably been explored, but I couldn't find a specific answer.
 
1 - 4 of 4 Posts
Top