Joined
·
67 Posts
Looking for some help with the installation of the PCIII on an '04 ST4S abs: As most of you are aware, the unit that they sell for the ST actually says it's for a Monster on the box, so the installation instructions and pics are obviously for a Monster. Questions:
The two plugs from the PC unit for each injector, does it matter which one goes for the front or rear cylinder? I noticed that one has a yellow wire and the other has an orange? Also, it says to look under the throttle bodies and find the throttle position sensor. The only place I see anything that looks similar to the TPS plug from the PC unit is zip tied to the frame just behind the battery area. IS this the throttle position sensor? I don't have a full manual yet so any help would be greatly apreciated.
Thanks!
Mark
The two plugs from the PC unit for each injector, does it matter which one goes for the front or rear cylinder? I noticed that one has a yellow wire and the other has an orange? Also, it says to look under the throttle bodies and find the throttle position sensor. The only place I see anything that looks similar to the TPS plug from the PC unit is zip tied to the frame just behind the battery area. IS this the throttle position sensor? I don't have a full manual yet so any help would be greatly apreciated.
Thanks!
Mark
