Ducati.ms - The Ultimate Ducati Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
59 Posts
Discussion Starter #1
Parting out my 900ss ie -- some pretty trick parts are available. Carby tank, stripped, but modified to work with an ie frame. Custom front bracket and tank internals swapped over. A 30 minute job to do. Leave it bare metal or paint it to match the rest of your bike. No dents! $500
2-1 exhaust system -- $750
Showa forks, with Andreani cartridges, new seals and oil. -- $800 (Andreani kit is $650 plus installation costs) - 0 miles on forks since kit install
749/999 front calipers, rebuilt, new seals and race pads (65mm spacing) -- $300
front wheel, good condition, straight ($250)
EBC front rotors, brand new $200
Rear 5.5 wheel, cush, lightweight rotor, vortex alloy 520
983792
983793
sprocket (sprocket is new) $200 -- 17mm axle
Most/all of these parts will bolt on to a 900ss carby, 750, 800, etc.
Keeping the engine and FI for another project.
 

·
Registered
Joined
·
273 Posts
I tell ya what, I’m not really into the 900SS, it doesn’t quite gel for me...but free bump for what is a good lookin’ bike! Lookin’ forward to the new project.
 

·
Premium Member
Joined
·
671 Posts
I'm interested in the exhaust. Do you have any more photos of it? Where did it come from?
 

·
Registered
Joined
·
59 Posts
Discussion Starter #5
Headers and 2-1 collector are from a Bimota DB4 -- there are equal length which is critical in making a V2 2-1 system. All stainless. Muffler is a Cone Reverse Megaphone. Welding work throughout is exquisite. Total weld porn. System comes with 2 header sets -- I was going to use one for tuning purposes, and the local dyno shop likes to drill rivnuts into the headers for tuning work. Wanted a set to tune, and then put the pristine set on.
983839
IMG_1240.jpg
983840
 

·
Registered
Joined
·
59 Posts
Discussion Starter #6
Exhaust sold. Package deal on front end -- wheel, axle, calipers, rotors, forks, triples... $1300 plus shipping. A killer deal for a pre-99 supersport.
 

·
Registered
Joined
·
59 Posts
Discussion Starter #13
Front rotors and calipers are sold. Updated prices:
900ss ie forks and triple (will bolt into any year 900ss, might also be a nice upgrade to a sport classic or st2/3/4 (both have 25mm front axles and 65mm caliper spacing) $400 -- these are rebuilt with 0 miles, new seals and oil, and Andreani fork kit. That's less than the price of the kit!
Front wheel: $100
Rear 5.5 wheel $50
Rear rotor -- common 6-bolt, lightweight machined rotor from projection components, in the UK -- $40

Shipping additional to prices above.
 

·
Registered
Joined
·
936 Posts
Did you sell the steering damper?
 
1 - 15 of 15 Posts
Top