[corygt]

Hi I can't find these anymore (in USA)... no coredcs or earl's or WM, or miller
any suggestions
95 900 SScr\

09 Ducati GT1000 Black and Gold; 14:40 with Ohlins F&R, Termis & Rizoma bling
95 Ducati SS 900 CR Red; 15:41 my new project…
81 Yamaha SR 500 total cafe project bike

 

[catilover]

have a look at these pics

http://www.ducati.ms/forums/attachment.php?attachmentid=29600&d=1207380847

http://www.ducati.ms/forums/attachment.php?attachmentid=29601&d=1207380847

http://www.ducati.ms/forums/attachment.php?attachmentid=29561&d=1207212526

http://www.ducati.ms/forums/attachment.php?attachmentid=29598&d=1207380847

 

[silas]

got mine as a 3 part kit from Pro-Italia many years ago. you'll need the earlier monster valve cover w/ built in bracket to hold the cooler above the front cyl. + 2 longer lines. fits fine within the SS fairings. keeps the oil cooler out of harm's way behind front tire on 91-98 SS's.

 

[corygt]

I like catilovers set up

Yes I want the one under the Cr's fairing . Lik

OK I'll google
some hits some confusion found on ebay.. BUT I guess all I really need is a under fairing mount and cool braided lines.. I like the red and blue fittings...sop I'm still looking around

09 Ducati GT1000 Black and Gold; 14:40 with Ohlins F&R, Termis & Rizoma bling
95 Ducati SS 900 CR Red; 15:41 my new project…
81 Yamaha SR 500 total cafe project bike

 

[catilover]

have a look at the top view of my oil cooler, iit has the part number on it
it is the same size as the original one but is 2 inches wide, 1 inch wider than stock plus you get much better air flow in the spot i have it too

 

[hdcvo2]

Is the fitting on the oil line where it connects to the engine a standard AN fitting?? If it is a standard AN fiitting did you need an adaptor to mate up to the female threads on the engine case??