Ducati.ms - The Ultimate Ducati Forum banner
1 - 3 of 14 Posts

· Registered
741 Posts
Hwy1&17 said:
why would the height of the lever make a difference? I could see if the rod was loose or something. do the 998s have the same kinda rod as the 999 with the adjustment in the center as well as at the end?
I'm not talking about adjusting the shift lever height. Adjust the rod length. There maybe too much or not enough tension so it's binding. Soft neutral is usually harder to find, since most people shift hard up and down. I had these same symptoms in the past.
1 - 3 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.