[st2lemans]

No luck with the Ohlins kit, but I ordered a Hyperpro from KneeDraggers.com for the 900SS (HP505747) $439.95 + $9.00 shipping I hope it will fit.

But it won't be here for this weekend.

They do have the Ohlins kit for the 900SS but it only lists it til the '01 model. They sent me a price quote for that one of $409.00, but I don't think it will fit.

For the SS1000DS, they'll fit, but you will need to shim the fork-leg clamp. I used a couple of old 0.5mm feeler guages.

Tom

 

[st2lemans]

tom -- does the older SS kit fit on the frame? If all it needs is a new fork mount, you can get those for any size fork from Ohlins.

I have 2 900SSie kits (the second one is sitting around, a friend threw it in with a bunch of other stuff I got from him). Both are DP offerings, one with a Zacharia damper, the other I can't recall, but here it is mounted (the frame clamp is on the down tube near the red clamp at the center of the damper body:

On both kits, the clamps for the frame tubes are correct, the fork one needed 0.5mm shims (feeler guages work perfectly).

Tom