Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 3 of 3 Posts

325 Posts
Discussion Starter · #1 ·
Hey guys,
Looking for some help with a measurement with a horizontal cyl head. My 888 snapped an exhaust manifold stud when removing the exhaust for the restoration. I have timeserts but need to know the depth of the casting so I can get the correct length inserts and not drill into the water jacket. The picture attached shows what I am talking about (measurement between green lines)If someone could measure from the outer flange of the cyl head to the end of the “casting pocket” which the stock exhaust stud threads into, I’d appreciate it.

Any 748/916 cyl head should share a similar measurement so those would work as well. Thanks guys



1 - 3 of 3 Posts