Ducati.ms - The Ultimate Ducati Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
234 Posts
Discussion Starter #1
I replaced the levers on my ST4 and lost the little rod or cylinder that depresses the micro switch from the front brake lever thus causing my brake light to remain on. From what I can find on the internet, I can purchase whole micro switch assembly that includes the part for about $40 but I hate to do that just to get this one tiny little plastic part. I included a picture of exactly what I am talking about. Any suggestions or help is much appreciated?
 

Attachments

·
Registered
Joined
·
1,210 Posts
I did the same! Ended up using the threaded part of a bolt that fitted in the hole and just filed it down to adjust to fit. It's been in there about 2years now!

John

Sent from Motorcycle.com App
 

·
Registered
Joined
·
234 Posts
Discussion Starter #3
Problem Solved!

A local dealer here stocks them. Apparently this happens a lot. I still don't know an official name of the part.

Thanks,
Mark
 
1 - 4 of 4 Posts
Top