Ducati.ms - The Ultimate Ducati Forum banner

Need advice on seat for '17 Multistrada 1200S...

2K views 12 replies 11 participants last post by  SDS 
I always add some 3/4" closed cell foam on a seat. Remove cover, glue the piece down, shape with an Xacto, staple cover back on. I usually add also another small piece near the middle of the seat to create a hump that'll lock me in place so I don't slide forward.
 
No, I glue it to the top of the OEM seat foam, then shape it out. The seat pan has a bazillion dips and crevices, and the OEM foam is molded to match, so adding to the bottom won't work. The last I bought came from ebay, and it's pretty flexible and easy to work with.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top