Ducati.ms - The Ultimate Ducati Forum banner

Neck Bearing Numbers

2K views 7 replies 4 participants last post by  mals900ss 
Good luck!

I tried Timkin and SKF and neither stocked them I was told though that they could be had, but it would take six to eight weeks. They are 26mm I.D. with a 52mm O.D.

I too got them from a dealer @ 38 bucks each! They can't cost more than 8 or 9 dollars.

I just bought all "eight" of the cam support roller bearing for a four valve motor for 50 dollars!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top