Ducati.ms - The Ultimate Ducati Forum banner
1 - 2 of 6 Posts

· Registered
Joined
·
156 Posts
Lets pick up this old thread and run with it....

I have the opposite, i have a 999 that i want to fit a multistrada triple onto. All the guys on eBay are affraid of tape measures for some reason. Was wondering if some of you guys could help me :)

Just looking for dimensions for the upper triple on the 1000, 1100 and 1200 models

To make it easier, i want to know about any triples that have the steering damper mount on the back edge of it. Possibly S models ? fork diameter is irellevant, as i can get them machined out to 53mm if needed...

Ok, measurements i need are...

Measurement A: Fork holes from center to center.

Measurement B: Offset measurement. from centerline between fork mounts to center of steering shaft mount and the diameter of the steering shaft mount hole.

Measurement C: From center of steering shaft hole to center of steering damper mounting hole...

I know the photo i have is of a 999 top clamp, sorry i cant find a multistrada photo.

Many thanks in advance :)

Jason
 

Attachments

1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top