Ducati.ms - The Ultimate Ducati Forum banner
1 - 2 of 4 Posts

· Registered
112 Posts
Discussion Starter · #1 ·
Hey All,

I have purchased a user pair of race fairings off a 749R and am mounting them on my 749S. Previously I had a pair of Sharkskins race fairing which on the lower (or belly pan) mounted at the V Cowl portion of the radiator and on the tabs behind kick stand.

The (new) used fairings which I suspect are Ducati Corse (not entirely sure though) do not have mounting points near the kickstand area tabs or on lower radiator. This is leaving me with a lower fairing that moves around quite a bit. These fairing do have two holes in the bottom of the belly pan both in front and in back which I suspect would be used to mount to hanger style bracket, but have never seen anything like that before.

Anyone installed fairings like this before. I will take a pic of the lower when I get a chance, just thought I would start thread in case I am missing something obvious.


1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.