Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #5 ·
The 916 does not have the best of head-port design of the long stroke Ducati's, compared to the 996, yet with slight cleaning of the ports, high compression pistions, SPS cams, and a nice 50mm full exhaust will bring your bike to life quite nicely.

Or just cams/cans/pistons will put a smile on your face.....

While Pistons and a used 50mm exhaust are still somewhat easy to find, real SPS cams are a tough one to find

Cheers,
Mark
Thank you for the info but you didn't mentioned anything about eproms.And what about balancing?
I have already a 54mm WSBK termi full exhaust to fit and i think I'll go for the high comp pistons,cams,ports eprom,filter and I'll try to save some weight from it :confused:
thnx
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top