Ducati.ms - The Ultimate Ducati Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
So I have recently relocated form GA to MD and have to get a state safety inspection performed on my bike before I can register it. I am assuming that there are two issues with my bike that might cause it to fail. The first being my windshield that I cracked with my elbow when I put the bike on the front tire stand the other day, I know...smart move. The second being that there is no tag light installed on my bike. I hate having my poor girl sitting in a garage when the weather is so nice. Does anyone know of any inspection stations in the Baltimore City/Parkville/Hamilton area that might pass my bike with these few flaws. I obviously plan on remedying the windshield as soon as some more funds come through. Any advice would be greatly appreciated. Thanks!
 

·
Registered
Joined
·
475 Posts
I just moved to MD also (from Florida). I'm just outside of Baltimore. I haven't heard anything about a state inspection. Best thing to do would be to call the MVA.
 

·
Registered
Joined
·
8 Posts
Discussion Starter #3
Just so you know. Your bike will have to pass a state safey inspection before you can register your bike and get Maryland tags.
 

·
Registered
Joined
·
70 Posts
Or, just do what I did if you are in the military. Register the bike with the state of your home of record. I also checked with the Tag agency and they told me about the inspection. Good luck!
 

·
Registered
Joined
·
62 Posts
Replace the windshield and put a flashlight over the licance plate. There is nothing that states that the light has to be powered by the bike just attached. I work at a inspection station in Jessup and we can do the inspecton for you. Just let me know.
 
1 - 5 of 5 Posts
Top