Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2021 HERE!
1 - 1 of 1 Posts

·
Registered
Joined
·
319 Posts
Some people drill those elongated holes out on Aluminium wheels to a larger diameter hole and use sleeves on the 4 pins. The ID of the sleeves' are the same as the OD of the pins and the OD of the sleeves are the same as the ID of the new enlarged holes.

But as anything else, you should consult a wheel repair shop or the manufacturer of the wheels to make sure that is OK on a mag wheel or any wheel for that matter.

-Fariborz
 
1 - 1 of 1 Posts
Top