Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

3,024 Posts
Fluid is leaking past the seal and out the vent hole. There's no rebuild kit available AFAIK. Replace the master cylinder. Brake fluid is corrosive to painted surfaces so you don't want it blowing back onto your bodywork.
That's an interesting bit of information. So the Ducati Hypermotard is fitted with non-rebuildable front brake master cylinders? A motorcycle that had a $15,000 MSRP is fitted with throw-away front brake master cylinders? That's nearly shocking.


Especially considering the fact that "super moto" bikes see fairly harsh treatment.


Ya learn somethin' new every day .... unfortunately sometimes it's bad news. :frown2:


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.