jet kit
-
Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 2 of 2 Posts
Joined
·
64 Posts
Current setup for 900ss, no snorkels, K&N filter, stock pipes:
Main: 145
Pilot: 42.5
Floats: 14mm
Needle: Factory Pro, second position from the top.
Mixture screw: 3 turns out.
Factory Pro needle jets, about 3,000 miles old.
Sea level.
Runs brilliantly. Pulls hard all the way through the rev range and returns mileage in the high 50s.
May tinker with the needle height after I put different pipes on, but my priority was reliable strong running first.
Hope that helps.
Nick
Main: 145
Pilot: 42.5
Floats: 14mm
Needle: Factory Pro, second position from the top.
Mixture screw: 3 turns out.
Factory Pro needle jets, about 3,000 miles old.
Sea level.
Runs brilliantly. Pulls hard all the way through the rev range and returns mileage in the high 50s.
May tinker with the needle height after I put different pipes on, but my priority was reliable strong running first.
Hope that helps.
Nick
1 - 2 of 2 Posts
Join the discussion
