Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 4 of 4 Posts

·
Registered
Joined
·
758 Posts
Discussion Starter · #1 ·
For the '06 Sport 1000's, is it just my imagination, or does the exhaust pipe for the front cylinder appear MUCH lower when going with the Termi 2:1 versus for the Termi 2:2?

I really wonder why that is so.
 

Attachments

·
unM0derator
Joined
·
2,853 Posts
Probably better flow characteristics on the 2:1. The slipons are using the stock header, which IIRC is narrower than the 2:1 kit, which allows for tighter radius turns.

One downside to the full system is that you can't use the center stand kit, if that is important to you.
 

·
Registered
Joined
·
593 Posts
I think its just your imagination.:)

The yellow bike has been pictured from almost full side on whereas the black bike is shown at an angle on its sidestand, I reckon that'll make up all the differences you'll see between the two pictures.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top