Ducati.ms - The Ultimate Ducati Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter #1
My LCD display from a 2000 ST4 has some issues. Portions of the screen aren't being displayed. I've opened it up and found corrosion at the bottom of the circuit board. I cleaned it up the best I can but there are some disintegrated traces on the board. Much to small to repair I think. Does anyone know where I can get just the circuit board? Does anyone have a spare working LCD they want to part with? Any help would be great.

Thanx
Chris
 

·
Registered
Joined
·
45 Posts
Discussion Starter #2
Does anyone know if the ST4S LCD gauge will work on a ST4 wiring harness?

Thanx
Chris
 

·
Registered
Joined
·
3,885 Posts
I thought they're the same, too. But my 1998 ST2 never displayed "DUC ST2" on the display when first turned on. My ST4S says "DUC ST4" (no "S") when first initializing...

Have to check the p/n's from year to year to see if they're the same or not.
 
1 - 4 of 4 Posts
Top