Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 1 of 1 Posts

·
Premium Member
Joined
·
1,059 Posts
Check the rubber grommet that is left in the master cylinder's inlet port. If it is hardened or cracked or damaged it may leak. Also check the reservoir nipple that fits into it. It should be smooth, with no casting flash, to seal well in the grommet.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top