Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
1,959 Posts
After you remove the bleed screw you will be left with the part the bleed screw fit into. You need to use an 8 MM allen key/wrench and screw that out. It is in very very tight. Once you unscrew that part the res will come right out. The little tube on the side is just a press fit, but keep track of the little o-ring as you pull the res to the side and up to take it off.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top