Ducati.ms - The Ultimate Ducati Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
623 Posts
Discussion Starter #1
I wanna install my GPS cradle on my ST3. Is there an easy place near the fuses to get dc fused or unfused? This is a low draw application and would prefer a switched source. Don't really wanna just tap in somewhere.
 

·
Registered
Joined
·
523 Posts
Ducati23 said:
There is a 12v switched plug under the dash reserved for heated grip elements you might want to consider.
This is located on top of the headlight assembly. You have to get the dash out of the way to find the end. Is is wired back to the fuse block position labeled "Grip Warmer". They only have a 5 amp fuse here. I actually used it for my grip heaters and plan on installing an auxiliary fuse block for other add ons.
 
1 - 3 of 3 Posts
Top