Ducati.ms - The Ultimate Ducati Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 17 of 17 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter · #1 · (Edited)
I'm making foot peg for Sport1000S.
Today I tried the prototype"1", feeling and riding position were very good:)

Next, I'll try the type"2". it is made of A2017, 17 positions and add folding system as OEM.

And then, I'm making also Thruxton's one for my friend.
Today I tried to install it, and fitting was good:) (right side of last attachment)
 

Attachments

·
Registered
Joined
·
85 Posts
Discussion Starter · #2 ·
Thanks for seeing, and sorry my poor English:):(

Then, I have an another idea. Omit the folding system and add heel guard to the extension.

this proposal is not realized immediately, but I am going to make someday:D

Sent from my CAL21 using Motorcycle.com Free App
 

·
Registered
Joined
·
85 Posts
Discussion Starter · #5 · (Edited)
mikedsilva, dieselndixie, thanks for your kind words:)
I have run the metal processing small industry in Japan, and I'm making them during work by lathe and milling machine, both are not CNC.
so I can not update immediately, but upload pics I go to the next step:)

BTW for example, extension of Aella is 20mm offset.
if there are people who have it, please tell me is the effect of it enough?
my prototype is 25mm offset and I feel good, but it's merely just tried only one day:(
I think if everyone say 20mm is enough, trying to make both 20mm offset.
 

·
Registered
Joined
·
85 Posts
Discussion Starter · #7 · (Edited)
Hi guys:) and thank you for kind words:D

This is the screen shot of my CAD data.
First attachment, upper side is OEM peg of Sport1000S, lower side is mine.
This is the right side peg (the side of brake pedal).

Second attachment is extension (25mm offset).
8 red positions, 8 blue positions, and 1 purple center position without extension, total 17 positions.
Green is OEM position.

I'll buy a plate of A2017 for making extensions.
go to the next step, I'll upload pics! thank you:)
 

Attachments

·
Registered
Joined
·
85 Posts
Discussion Starter · #8 ·
At first, I made adapter for Thruxton.
This is made of A2017. By mounting an extension that was my thinking, get 17 positions.
This parts will be completed if alumite treatment is performed next.

And I have been making peg. Material is Φ25 73mm A2017 round bar.
Next, I plan to make counter sunk hole about 58mm deep the center of this bar and to shave this bar to Φ22 exclude 5mm at a tip. and at last knurling finish.
 

Attachments

·
Registered
Joined
·
85 Posts
Discussion Starter · #9 ·
Tomorrow, a plate of A2017 will come. and today I tried to make the extension by milling machine.
milling condition is good, I can make it ;)

and then, I will try anodizing by my hand. maybe it is difficult, but it will be a good experience:)

Sent from my CAL21 using Motorcycle.com Free App
 

Attachments

·
Registered
Joined
·
25 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter · #11 ·
Thanks Kranzmann, I'm encouraged :)
the plate is expected to arrive today and I'm excited:D
 

·
Registered
Joined
·
821 Posts
Tomorrow, a plate of A2017 will come. and today I tried to make the extension by milling machine.
milling condition is good, I can make it ;)

and then, I will try anodizing by my hand. maybe it is difficult, but it will be a good experience:)
As one who has tried anodizing aluminum, it's better left to the pros. It is VERY easy to anodize, but if you want it to look remotely decent, let someone else do it
 

·
Registered
Joined
·
85 Posts
Discussion Starter · #13 ·
Thanks arbakken, I prepared battery liquid waste, NaOH sodium hydroxide, purified water, black and red Rit dye, aluminum wire, and battery charger.
I'll try anodizing:)
 

·
Registered
Joined
·
1,043 Posts
Very cool. I applaud everyone who has the wherewithall to mod...with parts of their own creation. I just buy rizoma, ike a lot of other poeple with no time or building smarts/tools, and I find it lame. Keep going!
 

·
Registered
Joined
·
85 Posts
Discussion Starter · #15 ·
Thanks LA-DUC:) I have a machine conveniently, if don't have machine or time, but mods is great fun :D
I like Rizoma and Ducabike's design, it's very cool!
 

·
Registered
Joined
·
85 Posts
Discussion Starter · #17 ·
Thanks lerceg:) I have tried home anodizing in this week, but it has not yet been successful.
the anodized layer was inadequate, but are thin:( the cause is probably because the flow of electricity was insufficient, it was not dyed in dark. I wanted to blacken but it has become a pale purple.
According to the Internet, it seems difficult to anodize to A2017, i am going to continue to improve steadily;)

Sent from my CAL21 using Motorcycle.com Free App
 

Attachments

1 - 17 of 17 Posts
Top